Shopping Cart

Cisco Catalyst WS-C2960XR-24PD-I Switch

In stock
SKU
WS-C2960XR-24PD-I
$2,292.16

P/N : WS-C2960XR-24PD-I

Cisco catalyst 2960XR-24PD-I IP Lite Base layer 2 - 3 stackable switch is comprised of 24 x 10/100/1000 Ethernet POE+ ports and two SFP+ uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM, etc.

Placement LAN Access

Flash 128 MB

Ports 24 x 10/100/1000 (PoE+) + 2 x SFP+

  • Details
  • Technical Specification
  • Reviews
Cisco Catalyst 2960-X series switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS Software features.
More Information
SKU WS-C2960XR-24PD-I
Weight 16.1500
Length 40.8000
Width 44.5000
Height 4.4500
Enclosure Type Desktop, rack-mountable 1U
Placement LAN Access
Interfaces 24 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE+ ¦ 2 x SFP+ ¦ 1 x USB Type A ¦ 1 x USB Type B ¦ 1 x console RJ-45 ¦ 1 x management (LAN) RJ-45
Expansion Slots 1 FlexStack-Plus slot and 1 power redundant slot
Flash 128 MB
Switching Capacity 216 Gbps
Forwarding Performance 95.2Mpps
Humidity 10% to 95% noncondensing
Ports 24 x 10/100/1000 (PoE+) + 2 x SFP+
Manufacturer Warranty Limited lifetime warranty
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI
Features ● IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub) ● Advanced IP unicast routing protocols (OSPF for Routed Access) ● EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite. ● Equal-cost routing ● Policy-based routing (PBR) ● Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) ● Protocol Independent Multicast (PIM)
Authentication Method Secure Shell (SSH), RADIUS, TACACS+
Max Units In A Stack 8
VLANs 1023
MTBF 322,740 hours
Status Indicators Port status, port transmission speed, port duplex mode, system, link/activity
RAM 512 MB
Power Over Ethernet (PoE) Yes
PoE Budget 370 W
Power Redundancy optional
Jumbo Frame 9216 bytes
Compliant Standards ● IEEE 802.1D Spanning Tree Protocol ● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af and IEEE 802.3at ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T ● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 ● IEEE 802.3az ● IEEE 802.3ae 10Gigabit Ethernet ● IEEE 802.1ax
Power Device Internal power supply - hot-plug
Processor 1 x ARM: 600 MHz
Software Included Cisco IOS IP Lite
Voltage Required AC 120/230 V (50/60 Hz)
Write Your Own Review
You're reviewing:Cisco Catalyst WS-C2960XR-24PD-I Switch