Shopping Cart

Cisco Catalyst WS-C3850-48P-S Switch

In stock

P/N : WS-C3850-48P-S

Cisco Catalyst 3850-48P-S switch is the next generation stackable enterprise level switch and integrated with 48 Ethernet POE + ports with IP Base IOS image.

Placement Access

Flash 2 GB

  • Details
  • Technical Specification
  • Reviews
  • Use Case
The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired and wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), modular and field-replaceable network modules, redundant fans and power supplies.
More Information
SKU WS-C3850-48P-S
Weight 7.9000
Length 45.0000
Width 44.5000
Height 4.4500
Enclosure Type Rack-mountable 1U
Placement Access
Interfaces 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE+ - 30 W ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x RS-232 - RJ-45 management ¦ 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 management ¦ 2 x network stack device
Expansion Slots 1 (total) / 1 (free) x Expansion Slot
Flash 2 GB
Switching Capacity 176 Gbps
Forwarding Performance 130.95 Mpps
Humidity 10 - 95% (non-condensing)
Ports 48 x 10/100/1000 (PoE+)
Manufacturer Warranty Limited lifetime warranty
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Features Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), PoE+, STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF)
Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Max Units In A Stack up to 9 switches with same IOS feature set in same series
VLANs 1000
MTBF 241,050 hours
Status Indicators Port transmission speed, port duplex mode, system, status, PoE
Power Over Ethernet (PoE) Yes
PoE Budget 435 W
Power Redundancy Optional
Jumbo Frame 9198 bytes
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at
Power Device Internal power supply
Processor Multicore CPU
Temperature 45 °C
Software Included Cisco IOS LAN Base
Voltage Required AC 120/230 V (50/60 Hz)

Number of AP per switch/stack: 100

Number of wireless clients per switch/stack: 2000

Total number of WLANs per switch: 64

Wireless bandwidth per switch: up to 40Gbps

Supported Aironet AP series: 3600, 3500, 2600, 1600, 1260, 1140, 1040

Write Your Own Review
You're reviewing:Cisco Catalyst WS-C3850-48P-S Switch