726911-B21 HPE H241 Smart HBA:ProLiant Accy - Storage
Do you need a cost effective controller that provides fast access to the data on the direct attached or shared storage drives and you do not have the room in your server to add additional storage?
The HPE H241 Smart Host Bus Adapter comes in a low profile, PCIe3 x8 standup form factor that provides the Gen9 Servers a reliable, high performing SAS connectivity to the data in the direct attached or shared storage solutions.
Featuring eight external physical links, it delivers 12 Gb/s SAS performance.
The H241 Smart Host Bus Adapter provides flexibility to run as an HBA mode or simple RAID mode.
When operating in simple RAID mode, it provides RAID 0, RAID 1, and RAID 5 with optional HPE Secure Encryption capabilities.
Unlike the HPE Smart Array Controllers, the H241 does not offer any acceleration or support cache modules.
The controller is also ideal for data backup to an external tape drives.
- Technical Specification
Cost-Effective External SAS Storage Connectivity
The HPE H241 Smart Host Bus Adapter comes in a low-profile, PCIe3 x8 standup form factor that provides a
basic building block for simple RAID storage solution for HPE Gen9 Servers.
Delivering up to 12 Gb/s SAS connectivity to the direct attached & shared storage providing increased
scalability, basic data protection, and flexibility for external storage connectivity.
You get optimized performance and uptime for your entry-level storage requirements.
This HBA supports SAS, SATA, Solid State Drives (SSDs) and external tape drives for increased flexibility.
Efficient and Simple Configuration, Deployment and Management
The HPE H241 Host Bus Adapter and the shared storage devices are configured, deployed and managed by the easy to use HPE Smart Storage Administrator software which is included in the intelligent provisioning capabilities of the server.
Delivers proactive service warnings and analysis based on Solid State Drive (SSD) endurance reports from the HPE SmartSSD Wear Gauge utility.
Simplify the management of the shared storage pool with HPE Smart Storage Administrator.
Transfer rate : 12Gb/s SAS per physical link; 6Gb/s SATA per physical link; PCI Express Gen3 x8 link width
Form factor : Standard PCIe plug-in card
Ports : External: 8 physical links across 2 x4 ports
Cache : No cache
RAID levels : 0, 1, 5, 10
Servers supported : HPE ProLiant DL20 Gen9; HPE ProLiant DL60 Gen9; HPE ProLiant DL80 Gen9; HPE ProLiant DL120 Gen9; HPE ProLiant DL160 Gen9; HPE ProLiant DL180 Gen9; HPE ProLiant DL360 Gen9; HPE ProLiant DL380 Gen9; HPE ProLiant DL560 Gen9; HPE ProLiant DL580 Gen9; HPE ProLiant ML10 Gen9; HPE ProLiant ML30 Gen9; HPE ProLiant ML110 Gen9; HPE ProLiant ML150 Gen9; HPE ProLiant ML350 Gen9; HPE ProLiant XL230b Gen9; HPE ProLiant XL250a Gen9; HPE ProLiant XL260a Gen9; HPE ProLiant XL270d Gen9; HPE ProLiant XL450 Gen9
Additional features : HPE Secure Encryption (optional license)
Supported disk enclosure : HPE D2600 Disk Enclosure; HPE D2700 Disk Enclosure; HPE D3600 Disk Enclosure; HPE D3700 Disk Enclosure; HPE D6000 Disk Enclosure; HPE D6020 Disk Enclosure; HPE MSA 2040 SAN Storage